Image of Veneer. But, What Is Veneer Wood?

What Is Veneer Wood? Best DIY Woodworker’s Guide

Wood veneers are exceptionally aesthetic and complex products that help communicate a woodworker’s reputation. The pieces are suitable for walls, furniture, floors, casework, and ceilings, making them valuable woodworking supplies. However, most craftsmen do not have a good grasp of this wood, thus the discussion: What Is Veneer Wood?

Veneer wood refers to thinly-sliced lumber made to deliver a finished-wood look on indoor trim work. The product comprises wood slices thinner than a one-eighth inch bonded onto an inexpensive substrate such as plywood, particleboard, or medium-density fiberboard (MDF) for the final outcome.

Read this guide for more insight into veneer wood, its uses, pros and cons, the recommended wood painting or staining strategies, and other related concerns.

Is Veneer Wood Real Wood?

It is essential to note that veneers utilize read wood, not manufactured material appearing like lumber. Besides, the sheets result from attaching thin natural wood slices onto a particleboard or fiberboard panel. So, you can expect the benefits of working with actual lumber and even more.

Veneer wood aims to deliver a higher-end solid lumber look for interior trim at a shorter manufacturing time and a lower cost. For instance, manufacturing a solid wood mahogany bench is pretty expensive.

But one can use less expensive lumber like plywood and then apply a thin mahogany veneer at the top.

The bench will resemble a mahogany wood piece at a significantly low-cost percentage. In addition, you can deliver an elegantly stained solid wood appearance by sanding and painting the veneer project.

Wood veneers are typically thin natural wood slices less than 1/40 inches thick. The manufacturing process involves pressing or laminating the lumber pieces to thicker core materials like particleboards, MDF, and plywood.

Also, remember that the resulting veneer products are still natural wood, only that machinery and technology slice the material without waste instead of sawing it into more extensive and thicker boards.

In addition, just like wide boards, you can quarter saw, plain saw, rotary cut, or rift cut the pieces to produce multiple grain patterns.

We have man-made reconstituted or engineered wood veneers featuring natural cellulose fiber. They come from highly sustainable and renewable forests and replicate endangered and expensive exotic wood excellently.

Uses, Pros, and Cons of Veneer Wood

Generally, a veneer is a thin wood piece attached to particleboard or other manufactured wood types. It lowers the project cost without sacrificing the overall surface appearance.

Here is a detailed account of its uses, pros, and cons to help you understand the wood better and determine the best way to utilize it.

  • Uses of Veneer Wood

The veneer attaches to the manufactured wood using nails, screws, or an adhesive. And the resulting product is ideal for cabinets, furniture, and floors. In addition, you can use MDF, plywood, or particleboard for frames and shelves, then cover the viewable surfaces with veneers.

The wood pieces are available in multiple grains and finishes and feature a more consistent appearance than most hardwood products. Moreover, they are excellent for viewable exposed sides, door panels, and interior cabinet areas.

Lumber veneers cut at 1/4o” yield 40 times more decorative surface area than a one-inch hardwood board. Also, the veneer’s physical attributes make it more flexible and easier to work with than hardwoods.

The myriad choices of the wood pieces in varying cuts give woodworkers more options than most hardwoods. Besides, you can stain, paint, and finish the veneer to suit your unique project requirements and individual taste.

Veneer wood comes in handy in building and constructing wood cabinets, doors, and furniture, thanks to its versatility beyond the traditional aspect. In addition, seasoned designers and architects incorporate this lumber into their plans to accent other mediums or complete interiors.

Lighting companies, audiophile speakers, RVs, aircraft, custom yachts, and musical instrument makers utilize this versatile material to deliver more elegant surfaces. More recently, wood veneer trends in DIY and craft-focused businesses.

Many upscale retailers incorporate veneer wood into their display fixtures. In addition, you will find the product in cell phone and mobile device cases, wall art, custom framing, wedding invitations, greeting cards, jewelry, and eyewear.

In summary, the three most common applications of veneer wood include:

  • Commercial Environmental Applications. They include interior architecture projects for buildings like office lobbies, reception areas, elevators, hotels, and board rooms where wall paneling is essential. Cruise ship interiors also benefit from wood veneers.
  • Casework. Veneer wood is an alternative to solid wood and reduces costs and carbon footprint. Besides, it is a perfect way to maximize natural resources sustainably.
  • Aesthetic Covers for MDF or Industrial-Grade Particleboard. The lumber is a cost-effective strategy and covers Medium density fiberboard (MDF) or industrial-grade particleboard to deliver a solid wood illusion, making the final product more robust. 

Pros of Veneer Wood

  • Low Cost

First, the lumber delivers natural wood aesthetics at a low cost. Also, there is a scarcity of raw lumber, making it expensive and unaffordable for most woodworkers. Therefore, veneer wood is an excellent cheaper alternative, consisting of thin wood slices glued to an engineered wood substrate.

In addition, veneers come from expensive, even exotic lumber like walnut, mahogany, and oak. They cover the inner less pricey wood and deliver a sophisticated product despite having a significantly lower cost than solid lumber.

The cost savings do not end with the purchase or initial cost. Woodworkers find veneer wood easier to mill and join than brittle or hard specialty lumber. Therefore, you are sure of a successful project without much hassle.

  • Flexibility

Every veneer wood piece is unique as each tree is different. Similarly, layers within a tree log have varying attributes, giving you endless design possibilities for an exclusive appearance.

You can customize natural veneers with varnish or polish to change their color from a dark hue to a lighter one more quickly than laminates. Also, the wood sheets help to deliver an edge and a uniform surface finish with a timeless look.

The wood can possess more or less strength than solid wood pieces. Put an oak veneer over inexpensive particleboard to deliver a relatively soft material. Or join the sheet with plywood used in fine furniture for a solid and durable project.

Nonetheless, using the weaker material is inadvisable, while the more robust product may be overkill. So, choose the most appropriate way to use veneer wood sheets.

  • Better Wood Utilization

Veneer wood facilitates better lumber utilization as you only need a thin wood layer to make furniture. Besides, a tree log can create only a few furniture pieces, whereas layering the lumber delivers numerous wood veneer sheets.

  • Increased Strength and Durability

Applying wood veneer layers to weak engineered lumber such as particleboard helps to increase its strength. Moreover, fiberboards like HDF and MDF are vulnerable to water damage, and the sheets protect them from ruin, increasing durability.

Veneers resist fragmentation and warping. Also, they last longer than laminates since they are natural products. However, it is prudent to keep the lumber strips away from water to avoid damaging the polish.

  • Eco-Friendly

Veneer wood is eco-friendly and easy to recycle. Even better, you can crush the lumber to make wood waste after its intended life span. Then, join it Medium density fiberboard (MDF) and particleboard.

Hardwoods such as maple and oak are incredibly slow-growing. In addition, exotic lumber such as teak and mahogany only grows in rainforests and other few selected areas. So, it is only a time factor, and we deplete the trees.

Fortunately, one log produces multiple veneer wood sheets as one layer is as thin as 1/32 inch. In addition, making these lumber sheets instead of sawing trees into solid lumber leads to harvesting fewer trees. Therefore, manufacturers can keep up with the rising demand.

  • Non-Toxic

Unlike laminates, veneers are a natural resource and thus non-toxic. Moreover, we have safe, non-toxic adhesives on the market that are excellent for applying wood sheets to different substrates.

Cons of Veneer Wood

  • Susceptible to Water Damage

Over prolonged exposure to moisture damages wood veneers. In addition, the lumber is prone to water damage in wet conditions unless you apply a sealant on the surface for added protection.

  • The Wood is Irreparable

Natural wood furniture is easy to repair and restore by sanding thoroughly and polishing. However, this exercise does not work for veneer wood as it is impossible to improve or revive the surface once damaged.

  • Installation Requires Skilled Workers

These wood sheets aren’t easy to install like laminates. They need skilled workers to remove the air gaps lest you compromise a perfect finish. Also, it is advisable to acclimate the veneer wood before installation. For instance, keep them in a room for three to five days before resuming use.

  • More Maintenance

Veneer wood needs more maintenance than other lumber types. In addition, it is best to polish the surface periodically for increased durability and an enhanced look.

  • Formation of Cracks

Typically, you overlay wood veneer on plywood or MDF. But the strips have different contraction and expansion rates. Therefore, you will observe cracking when the two materials do not expand or contract at the same rate.

  • Perceptions

Wood veneer appears as an inferior alternative to products from solid lumber. In addition, since the material requires expertise, shoddy workmanship contributes to the project’s cheapness and failure. Therefore, most woodworkers prefer working with a sure bet, solid wood.

Using veneer wood is so complex that we have industry regulations such as Architecture Woodwork Standards to ensure that all parties – woodworkers, general contractors, and architects – are on the same page.

Nonetheless, the lumber delivers an exquisite look to your interior after proper installation. In addition, although it does not last like solid furniture, you will get wood aesthetics at a lower price.

Can You Paint Veneer Wood?

It is possible to paint veneer wood. But you have to prime as much chalk paint as possible because the surface is very smooth. Also, although it is improbable that the finish will scratch, verify that the lumber does not crack for a durable result.

In addition, wood veneer refinishes easily like other solid wood furniture pieces. The only difference is reducing your sanding as the natural wood sheet is thin on veneer pieces.

How to Paint Veneer Wood

The first step is to gather the correct supplies: replacement veneer, detergent, utility knife, clamps, tack cloth or vacuum, 150-grit and 220-grit sandpaper, primer, drop cloth, newspapers, painter’s tape, paint, paintbrushes, and varnish. Then, follow the procedure below.

  • Repair the veneer wood if necessary. Glue down any damaged sheets and replace buckled, cracked, or damaged ones. In addition, use a utility knife to cut the area to help create a straight edge and cut a new veneer patch.
  • Glue the new wood veneer and use clamps until it dries. This way, you’ll guarantee a smooth surface from the beginning. Also, remove any hardware, such as knobs, pulls, hinges and screws, and store them in a plastic bag to avoid losing them.
  • Clean the veneer with water and detergent, but avoid oversaturating the surface with moisture. A soft rag dampened with the cleaner does the trick, and an old towel will help remove any remaining water.
  • Use 150-grit sandpaper to lightly sand the veneer surface. But be careful not to rub through the wood. Remember that the wood layer’s thickness varies, with higher-quality pieces thicker than lower-quality ones.
  • Sand enough to scuff up the lumber for the primer and paint to adhere tightly. Then, vacuum the surface or wipe it with a tack cloth to remove any residue before moving to the next step.
  • Cover the floor or surrounding area with a drop cloth or newspaper and mask off adjoining surfaces or objects with painter’s tape. This way, you avoid accidentally painting unwanted areas, making clean-up pretty quick and easy.
  • Apply a thin primer coat to the wood and allow it to dry. Also, consider using multiple thin coats rather than one thick layer for a more consistent and uniform finish.
  • Use 220-grit sandpaper to gently smooth the lumber. The exercise also helps to remove any imperfections and give the next primer coat a surface to adhere to tightly.
  • Wipe the veneer surface with a tack cloth or vacuum it to remove any dust. Then, apply a second primer coat and dry it for about 24 hours. 
  • Again, lightly sand the wood with 220-grit sandpaper and clean the residue. Next, apply a thin paint coat over the veneer and allow enough drying time. However, consider counterchecking with the manufacturer’s guidelines for the best outcome.
  • Sand the first paint coat with 220-grit sandpaper and remove the resulting dust. Then, brush a second layer and let it dry for at least 24 to 48 hours before using the surface.
  • Finally, varnish the piece. Apply several coats to protect the paint coat from accumulating dust and dirt. In addition, the varnish layer is easy to remove from the painting during cleaning. Therefore, it makes maintenance easy.

Here’s How to Paint Veneer

Can You Stain Veneer Wood

The answer is yes! Staining veneer wood surfaces is an excellent alternative to painting and allows you to revive and restore beautiful lumber. Moreover, the wood often stains like a solid wood piece. But minimize sanding to avoid ruining the surface.

How to Stain Veneer Wood

Choose the most suitable stain for your work, and depending on the intended finish, you can work with water-based, oil-based, and gel stains. In addition, every formula has slightly different attributes. So, a finish may be ideal for one lumber type but not another.

For instance, rosewood and teak have more natural oil than hickory and oak. The oily lumber will not take in water-based stains like the less oily woods. Therefore, it is prudent to assess your work and get an ideal product.

The primary wood veneer staining steps are similar, but each formula’s waiting and curing durations vary. Check out the procedure below for more insight.

  • Evaluate the veneer surface carefully and confirm it’s smooth and ready for staining. Remember that most mill-sawn and backed veneers do not need sanding. Besides, the former is very thin and cannot withstand heavy sanding.
  • Sand gently, starting with 180-grit sandpaper. Also, follow the wood grain direction and keep checking the surface to avoid damaging it.
  • Clean the wood thoroughly with water and detergent to remove dirt, dust, and debris. In addition, dry the wood properly before applying the stain.
  • Stir the stain vigorously before application and every thirty minutes while working. Test for the correct hue on an inconspicuous spot or a scrap veneer piece.
  • Apply a wood conditioning formula if the surface is soft and porous. Then, allow it to settle for five to 15 minutes. Wipe it off with a clean cloth and avoid waiting more than two hours before applying a gel formula.
  • Stain the veneer with a soft bristle paintbrush, foam brush, or rag. Ensure that you follow the wood grain for a consistent finish. Next, let it settle for about three minutes, and wipe the excess with a clean cloth.
  • Finally, allow the surface to dry for eight to ten hours, and add subsequent coats if the color is not rich enough. Then, let it sit for at least 24 hours and apply a sealer.

Frequently Asked Questions

Some of the most asked questions are:

  • Is Veneer as Good as Solid Wood?

Veneer wood is still very durable despite not being a hundred percent solid wood. In addition, the lumber is not susceptible to the same aging effect as its counterpart. Therefore, you will not worry about the product warping or splitting sooner.

We have two main wood furniture categories: wood veneers and solid wood. Solid wood refers to furniture crafted from natural lumber, whereas veneer furniture comprises thin layers attached to an inner panel.

It is a common misconception that veneer wood is lower quality than solid lumber. Generally, the veneers outperform natural wood in strength, durability, and manageability.

  • What Paint Will Stick to Veneer?

Chalk paint is the most suitable formula for veneer furniture. However, ensure that you prime as much as possible as the surface is very smooth. Also, it is advisable to verify that the lumber does not crack for a durable result.

Clean the surface thoroughly before priming to facilitate proper adhesion. In addition, use fine-grit sandpaper to scuff up the existing wood grain and wipe the dust with a tack cloth or soft rag.

  • Can You Paint Straight Over Veneer?

It is possible to dry, stain, paint, or treat wood veneer. The painted surfaces make furniture look newer and even more impressive. In addition, you can make them match or complement existing decor styles.

  • When Can I Use Veneer Wood Instead of Solid Wood?

The first scenario is when you need a more stable and cost-effective alternative. The wood sheets are perfect when reducing the project cost while delivering high aesthetic value.

However, it is advisable to consult with your client to confirm that they agree that veneer wood is better than solid wood for their decorative projects.

Also, wood veneer is suitable when weight is an issue. For instance, you will deliver a better result with the lumber sheets when working on a ship or yacht’s interior architecture. Therefore, it is not just a cost-effectiveness matter as you can significantly reduce the boat weight.

  • How Can I Tell if Wood is Veneer?

You can identify veneer wood by inspecting the wood grain. The top and bottom pieces come from different lumber types, meaning they will not match. So, check out for varying wood grains.

Conclusion

Veneer wood is among the most popular interior woodworking materials for various wood-based applications. Besides, most interior designers use lumber to improve the project’s aesthetics. But it is prudent to understand the product for a more successful outcome. So:

What Is Veneer Wood?

The product comprises thin wood pieces glued on engineered lumber such as blockboard, particleboard, plywood, and MDF to give a finishing and decorative look. Also, depending on wood species, cut, and matches, it is available in different categories.

So, consider the lumber for your floors, ceilings, casework, and furniture to project fine craftsmanship and opulence.

Image of a woodworker wearing hearing protectors for woodworking

Tyron Otieno

Tyron is an avid woodworker and writer. He founded this website to help other woodworkers, whether hobbyists or professionals by sharing his knowledge and experiencie after a decade of woodworking.

Leave a Comment

Your email address will not be published.