10 Best Table Saw Fences- Reviews & Buyer’s Guide

shop fox, one of the best table saw fences for woodworkingThe table saw is the most used tool in a woodworking shop. For the table saw to be complete, it requires a fence. A good table saw fence would have a rip fence parallel to the blade and a sliding crosscut fence perpendicular to the blade. Fences provide both safety and accuracy. The best table saw fences save time and ensure you get to deliver precise cuts.

In some cases, you may not be happy with your performance and would need to lift it. A replacement fence will do the job for you as it is upgraded. As technology advances, it is important to move with the trend as it saves time and gives you value for your money. 

In this post, I’ve reviewed some of the best table saw fences for woodworking with the hope that it helps you make informed decisions even as you look to get yourself a saw fence.

List of Best Table Saw Fences

1. Delta, 36-T30T3

This fence is built well and worth its money any day based on its features. It is a one-piece square tubular rail with a mounting design. The maximum rip cut to the left of the blade is 13-1/2 inches, with the length of the fence being 37 inches. There are differently engineered models that it attaches to, which includes contractor saw, Hybrid saw, and other Unisaw models.

The fence comes with a three-point locking system with twin hairline pointers that enable you to have the fence parallel to the blade. Now, this makes the accuracy to be within 1/64 of an inch(o.4mm)

Additionally, this piece of equipment comes with an easy gliding, steel tube fence body to handle quick precision ripping cuts and square cuts. Delta designs are always unique and made to fit their purpose ideally. For this fence, securely clamps to the front tube and hooks over the rear rail to allow for fence attachments. Once you get the fence, you get to read and understand the installation process you will be ready to continue cutting.

Summary of top features

  • Mounting design attaches to different saw models.
  • THE three-point T square locking system is accurate with 1/64 of an inch.
  • Steel tube fence body
  • Designed with clamps and hooks
  • Added rear hold down support when using jigs.

Image of delta, one of the best table saw fencesAdvantages 

  • It is a fantastic upgrade for an old table saw.
  • Fairly good price
  • Installation is easy
  • Smooth and accurate


  • Adjusting the fence is not that friendly as the adjustment screws are between the rail and tube.
Check Latest Price


2. Vega U50 Table Saw Fence System

The Vega U50 models’ quality and capability match the professional demands of a saw fence. The best feature about this first-class fence is the micro-adjustment. The Vega model has a rod and thumb nut that moves the fence thousands of inches in either direction. Additionally, a full rotation carries the fence 1/16th of an inch, and the cam locks the position securely. 

You get an impressive 50-inch capacity to the right of the blade and 8 inches to the left. This big capacity Vega system is easy to install and a pleasure to use. With a very agreeable price for passionate woodworkers and do it yourselves, you cannot miss having a glimpse of what it can do.

Another feature that you will love is the fence bar. It is high, wide, and has a channel along its length. This combination makes it extremely perfect for a substantial sliding jig. It is particularly made of quality aluminum alloy extrusions enabling it to produce precision cuts. 

Summary of top features

  • A lockdown feature that is rock solid
  • There is a fine micro-adjustment
  • A 36-inch fence bar
  • Auxiliary table support

Table saw fenceAdvantage

  • Steel constructed 
  • It has a threaded rod and thumb nut that moves the fence.
  • 50 inches rip capacity


  • The saw is not included in the unit.
Check Latest Price


3. Shop Fox W1410 Fence 

The shop fox fence is a great accessory as it comes with standard rails. The model is rated among the strongest fence systems for saws in the market. It has been designed in such a way that it will secure on both ends simultaneously. Therefore, it gives you absolute rigidity, which is paramount for you to achieve total accuracy. It comes with a length of 27 inches, which is ideal for standard tasks.

The product has been made of polished and iodized aluminum, which is black and can make fine adjustments. It is made possible by the micro-adjustment knobs, which are located on both ends of the fence system.

A unique ball bearing guides allow you to move the fence with one finger and the least exertion. All these features make it easy for such applications as cutting, routing, and trimming. The product is designed in such a manner that the installation process is made fast and easy.

Summary of top features 

  • Moves on ball-bearing guides
  • there are fine positioning knobs on both sides for left and right-handed use
  • 27 inches’ long

Image of the best table saw fenceAdvantages 

  • Easy installation
  • Locks on both ends
  • It fits on major brand table saws


  • The instructions on the installation process can be misleading.
Check Latest Price


4. Vega PRO 50 Table Saw Fence System0

Any person who has a table saw or has once used one will tell you that Vega is top of their list. This model is larger than the other models at 42 inches. There is a smaller version that we have gone through at 36 inches. Depending on the kind of work or project, you get to decide which model suits you best.

It is one of my favorites mainly because it allows for longer rip cuts, and its rip capacity is 50 inches. It also works best, especially when you need to upgrade your table saw to a precise cutting machine. Its reasonable price attracts customers from all over the world. Installing the fence should not take longer than 15 minutes. There is no drilling required as it fits Delta Unisaw, Contractor, Powermatic 10 inch saws, and most Sears 10 inch saws.

The Vega Pro has micro-adjustments that ensure you have perfect, accurate cuts. It was specially designed to use the existing bolt holes as there is no drilling required. It is extremely refined for serious woodworkers.

Summary of top features.

  • 50 inch right and 10 inches left of the blade
  • A fence mounting system that allows full adjustment for accuracy
  • Micro adjustment and auxiliary table for support
  • Guide rail that is supported by brackets

Table saw fenceAdvantages

  • Greater rigidity
  • Easy to install
  • Aluminum fence head


  • The steel plate does not have a good finishing.
Check Latest Price


5. Shop Fox W1720 Aluma-Classic Fence with Long Rails

With the shop fox, the W1720 model comes an included self-adhesive measuring tape and adjustable magnified cursor. The self-stick tape mounts directly to the rail and features high visibility yellow with black numerals. It offers the ability to position the fence with a high degree of precision.

The widely spaced adjustment points allow a very precise setup. A cam lever that helps lock the front mechanism and torsion box design allows the fence to fit just about any table saw—what a fantastic way of using it without the need for a rear locking mechanism.

The heavy-duty locking lever ensures no movement when the fence is set to the desired position. Deflection while guiding wood will be a thing of the past with this lock and torsion box design.

The beefy extruded aluminum and steel construction and right-angle design make this Aluma-classic fence durable and accurate. At 79 inches’ rail, the fence provides a cutting capacity of 50 inches’ maximum rip to the right of the most table saw blades. Choose this classic fence with long rails, and it will assure you a safe and reliable operation.

Summary of top features

  • Easy single locking cam action lever
  • Magnified cursor lens
  • Adjustable fence wear pads
  • Wide right angle design for maximum accuracy and support

Image of shop fox, one of the best table saw fencesAdvantages 

  • Includes long rails
  • It comes with a self-adhesive measuring tape.
  • Steel and aluminum fence body for durability and strength


  • At times the item does not match the description as it comes with missing rails.
Check Latest Price


6. Wixey WR700 1500mm/ 60″ Digital Saw Fence Readout

Wixey WR700 model helps to increase a table saw’s versatility and accuracy. Traditionally we always have to rely on the tape on the fence itself to give us an accurate reading. Most of the time, the tape is worn off your saw, or the pointer is dirty or doesn’t work. You no longer have to rely upon or your face or your ruler to deliver accurate cuts.

The Wixey electronic table saw fence read-out fits that purpose and gives a great accuracy level when setting the fence. Installation is very easy as the instruction has details on mounting the system to various table saws. It is just as simple as installing a couple of triples A batteries and sliding them into the rail. All of the hardware, including brackets, drill bits, and screws, aids in installing the read-out on your table saw.   

The rails for the digital read the outcome in two pieces, and there is a connector. The extraordinary thing about this is you can mount the track to a variety of different length saws. You can mount the system on a fence up to 6o inches long. It can also be mounted either right or left of the saw blade.

With the rails installed on the table saw fence, you need to install the sensor strip. It comes in two pieces, and all you need to do is peel back the adhesive film and sticking it to the rail. 

  Summary of top features 

  • A tool that helps align the sensor strips together. 
  • Electronic digital read-out
  • It comes with a couple of different brackets
  • Magnetic attachment allows the fence to be removed and maintain calibration

Table saw fenceAdvantages 

  • Large and easy to read display which is read infractions or millimeters
  • Measures up to 60 inches’ total length
  • Has both absolute and incremental measuring modes
  • The digital read-out mounts on any round rail or rectangular rail fence
  • It has nice and heavy rails


  • Sometimes you have to check with your tape measure
Check Latest Price


7. CARTER MAGFENCE II Universal Magnetic Fence

The Carter Magfence is unique and engineered different from all the other table saw fences in the market today. Powerful magnets are what this version uses to hold the fence in position. It attaches or sticks magnetically for universal fit on most ferrous metal tables. You do not need to worry about wasting your money away on a fence that will not fit your table saw. All you have to do is place it on the tabletop, and it holds into position with the magnetics as the name suggests. 

It measures 16 inches long and 3-1/2 inches tall L shaped aluminum extrusion with multiple T-slots. If you are cutting thicker pieces, just set the fence and lock it into place. When it comes to cutting thin material, get close to the blade. No matter what fence you use, it is vital to remember when the blade is moved on the wheel, and it can change the angle a little bit. Therefore, it is advisable to be alert and keen whenever you are making cuts.

 Summary of top features

  • It comes with multiple T-rails so that you can put other accessories in there.
  • Attaches with two powerful magnets
  • L shaped Aluminum extrusion

Image of the best table saw fenceAdvantages 

  • Easy to store
  • Easily removable to use with multiple pieces of equipment
  • Compatible with all Magfence II accessories
  • Has a warranty information


  • In some products, the fence is not square to the table.
Check Latest Price


8. Dewalt DW745 Table Saw Replacement Fence

With Dewalt, they do understand that fixing things makes a lot of sense. Woodworkers or wood enthusiasts understand that losing your rip fence or getting damaged beyond repair requires a replacement. A fence assembly is a new complete rip fence for the saw as it comes completely assembled and ready for use. 

A notch on the fence aligns with a bolt-on the rail; this is the same on both the front and the back. You get to align the same notch thing on the backside and then tighten both the front and the back.

Take some time and look at the cursor to make sure it is adjusted accurately, showing the correct distance between the blade and the fence. To do that, bring the fence all the way over so it is in contact with the blade. Now lock the fence in place so you can adjust the cursor. So now the cursor is in line with the fence, and you are ready to cut. The push stick is usually secured to the fence, so you get to remove it and secure it to the new fence. 

Summary of top features

  • It fits a 10-inch table saw
  • Designed with a push stick holding section

Table saw fenceAdvantages 

  • The price varies with different customers.
  • Has a 1-year warranty


  • The guide easily beaks when it drops.
  • A bit expensive for a replacement
Check Latest Price


9. Ryobi RTS10 10″ Table Saw Replacement Rip Fence

The Ryobi manufacturers always remind customers to make sure that the table saw is unplugged. Switch key also needs to be removed before performing any adjustment or install accessories. Depending on your budget, this Ryobi model retails at a very affordable price compared to the best table saw fence overall. The expectations should not be rocket high, but it performs the work it is intended. It has limited use since it is not a universal product. 

At 20 inches long aluminum constructed, you do not expect substantial rip cuts. Operating this tool with one hand is made possible by a single locking cam handle. You can be assured of decent results with this cost-friendly table saw fence. The material used to put the fence together by the manufacturer is steel and aluminum.

They do not lose their luster, which means the metal will remain radiant for a long time. Furthermore, the Ryobi fence will not need maintenance and will remain free of rust. They are smoothly allowing you to make precise cuts by providing support and a guide.

Summary of top features

    • Compatible with the RTS10 10” table saw.table saw fence for woodworking


  • Weighs 1.45 pounds


  • It is a genuine part that comes from the original manufacturer.
  • Comes as a replacement part


  • It does not fit on any other table saw.
Check Latest Price


10. Vega U26 Table Saw Fence System

This table saw fence system is designed for a variety of different table saws. With a rip size of 26 inches to the right and 8 inches to the left, you get plenty of space for making rips of different sizes. This fence provides a smooth yet sturdy slide that makes it easy to nail down precision cuts. There is also a fine adjustment for dialing and exact measurements. This piece of equipment is extremely secure, and once you lock the fence into place, it does not barge. 

Any professional woodworker will use this fence system to upgrade their saw to a precise cutting machine at a reasonable price. The manufacturers designed this tool with bolt holes to be easily used instead of having to drill them. However, weighing only 34 pounds, the table saw fence does not come with a saw; you have to purchase it separately.

Very little accuracy is needed, as the fence mounting system allows full adjustment. It becomes very quick to install, taking as little as 15 minutes. It comes packaged very nicely and comes with the aluminum brackets that replace the old brackets. 

Summary of top features 

  • It comes with a micro adjuster as far as fractions of an inch.
  • There is a lock mechanism that pops up and down and enables the fence not to shift.
  • Steel constructed 

Table saw fenceAdvantages 

  • It has a 36-inch bar
  • Micro adjustment and auxiliary table support
  • The fence mounting system allows full adjustment.


  • The aluminum brackets are not finished; they are a bit rough.
  • The saw is not included in the unit.
Check Latest Price


Best Table Saw Fences Buyer’s guide

As we have seen, there are very many tables saw fences that different manufacturers have designed. You only need one best table saw fence for every table saw you have in your woodworking workshop. A quality fence can reduce cost by reducing the time spent re-cutting material. Let us go through some of the technical details to focus on when buying a good fence.

Factors to Consider When Buying the Best Table Saw Fence.

  • Weight of the fence

The fence’s weight is one of the most important factors when planning to purchase a table saw fence. When placing the fence on the table, it needs to be of minimal weight and better build quality. If the fence weighs anything above 40 pounds, it will need a strong table to work hold. If the table does not seem strong enough, it might break due to excess weight or get scratches. It is therefore of utmost importance to consider the weight before buying a fence.

  • Installation 

There are various ways of installing a table saw fence, depending on the manufacturer. There is the easiest method even though it is not the most exact. Put the combination square in your miter track and press against the edge. Lock your fence next to the ruler and slide the combination square along the track. As it moves, you keep it pressed against the edge of the miter track. If the fence moves away from the ruler or pushes your ruler away, it is not properly aligned. That means you have to adjust it and try again. 

See how easy it can be? It even gets better, especially when the product is designed by the same brand that made the tale saw. The manufacturers seem to follow the same guidelines and tend to have the saw in mind. Manual adjustments are usually needed when you are buying a separate table saw for a correct fit. This works best and is also recommended if you are a professional and understand what is required for proper installation.

  • Model and type

As we have stated above, the table saw fence may come with the table saw from the same manufacturer. In most cases, this is ideal because products of the same company do not differ so much. You will have an easy time putting the pieces together to have precise cuts. There is a wide variety that comes with the best table saw fence. One of the most common types is a T square fence.

A T-square fence adjusts and fits well with brands like Delta, Powermatic HTC equipment, and so on. Customers love it because of the 3 points and the locking feature. It attaches to the tool, and part of the design can be replaced. Another type is Uni-fence, which usually comes with table saws. It works smoothly with the help of a miter gauge making perfect cuts. When it comes to cutting thin material design, it can be adjusted.

  • Size of the fence 

Some woodworkers use large appliances and get to cut material on a large scale. A 50-inch table saw will serve the large material with ease. This rip fencing system is ideal for large work. Additionally, the adjustment becomes easy with the ripped system, which adapts material easily. For the sake of ordinary users, a 30-inch rip fencing system is the best. It does not consume space and is easy to set up. When a need is, you can have large cuts with the support of a rip fencing system.

  • Lock system 

A tight and stable position with the lock system means there will be perfection in your project. As long as there are no movements when doing the cuts, you will be assured of accurate cuts. The lock system is rated as one of the excellent designs. It works when adjusting the fence with the blade at an equal distance on each point.

  • Your budget

We all have an estimate of income and expenditure for a long period. A high-quality well build rip fence is a good option for investment. A professional woodworker knows what their project entails and what is required for maximum cuts. If you know of an exact type of fence that you desire to have, it is best to save up more. Your budget will detect the type or kind of table fence saw you are to purchase.

  • Accuracy 

A table saw fence needs to remain perfectly parallel to the saw blade at all times and accurate. The kind of fence that slides when in use can cause the saw blade to bind with the wood. This can further cause dangerous kickbacks. It is difficult to adjust on both the front and the back edges, which can also be dangerous or even frustrating. When picking a fence, spend some time focussing on it. If it locks in place, then you have made the right choice. 


The best table saw fence for any woodworker would give you the satisfaction of working with little to no errors. There is much variety in the market, and picking one can be difficult, especially when they all serve the same purpose. Just follow the guide we have provided and get to decide which option is best for your project.

If you ask me to suggest one table saw fence that would work effectively on almost any table saw then I’d pick Delta, 36-T30T3. It’s a complete package with all the desirable features you’d want for your various woodworking projects. My choice for the above saw fence is guided by preference and user experience over the years. You have the liberty to choose a product that will suit your tasks.

I hope you found this content helpful for your quest of landing one of the best table saw fences in the market. Do you have a question? Opinion or suggestion? Kindly share it with me in the comment section below. Meanwhile, enjoy your shopping.

Image of a woodworker wearing hearing protectors for woodworking

Tyron Otieno

Tyron is an avid woodworker and writer. He founded this website to help other woodworkers, whether hobbyists or professionals by sharing his knowledge and experiencie after a decade of woodworking.